Solvent-Based Coatings

Solvent-based coatings are cut in mineral spirits or high flash point solvents that aid in easy application to metal surfaces. Quick to dry, leaving a firm/hard shell... these rust preventive coatings are made for long term applications.

Success Story

SUCCESS STORY

The global leader in elevator manufacturing was experiencing rusted guide rails before installation, costing valuable time as this situation required the removal of corrosion before installation.

Read More

Coatings - Cavity Wax

  • Provides superior protection against salt spray and humidity
  • Approximate dry to touch time is 2 to 4 hours
  • Offers easy removal from surface and clothing
  • Repels water, self-heals, and remains flexible to prevent chipping or cracking
  • Recommend in use wherever a water displacing, long term, inner body corrosion preventive is needed
  • Normally applied by low pressure airless spray equipment with accessory spray wands capable of coating critical areas through existing openings or drilled 1/2 inch access holes
  • Designed to provide a long-term protective film for automotive primed and unprimed steel
  • Can be applied using low pressure airless or air assisted airless equipment using accessory spray wands
  • Formulated to pass all the requirements of Honda's Specification titled Test Method on Wax
  • A high solids, cavity wax designed to provide long-term protection for enclosed automotive body sections.
  • Superior protective for automotive bodies
  • Will not stain automotive body paints
  • Repels water, self heals itself, and remains flexible
  • A metalloorganic, polar type, corrosion preventive
  • Designed to provide long term protection of automotive undercarriages
  • Dries to a firm grease-like film that will self heal when damaged
  • Designed for rustproofing new and used vehicles
  • Approved by OEM manufacturers
  • Designed as a hinge seam protective wax for new vehicles
  • OEM approved product
  • Designed to protect enclosed automotive body sections
  • Repels water, self-heals, and remains flexible to prevent chipping and cracking

Coatings - Paint

  • All-purpose asphalt protective paint
  • Specially developed for low-cost maintenance of metal surfaces and structures
  • Excellent for water resistance
  • A low VOC, air dry, high solids, solvent-borne corrosion preventive
  • Effective barrier against corrosive environments
  • A low VOC, high solids, solvent-borne corrosion preventive coating
  • Provides excellent protection for ferrous and non-ferrous metals
  • An effective barrier against corrosive environments
  • Cured film is hard, flexible and durable
  • An effective barrier against corrosive environments
  • Designed for ferrous and non-ferrous fabrications and industrial components

Coatings - Temporary Rust Protection

  • Wax-based, solvent type, cold applied, corrosion preventative
  • Designed for use on ferrous and non-ferrous metals
  • Works for metals exposed to indoor or outdoor storage conditions
  • MIL-PRF-16173E, Grade 4, Class 1
  • An effective water displacing rust preventative compound
  • Will not emulsify, even in the presence of alkalis
  • Quickly separates water displaced from metal surfaces after machining or cleaning operations
  • MIL-C-0081309, Grade 2
  • A solvent cut thin film rust preventive
  • Designed to protect metal surfaces during transit and storage
  • Can be applied by dip, spray or brush
  • A barium free, moisture displacing solvent cutback rust preventive non-emulsifiable rust preventive and water displacer
  • Provides a protective film that is non-staining and non-discernable
  • High solids, rust proofing compound
  • Designed to provide long-term protective film for automotive body sections
  • Formulated for a low viscosity that allows maximum seam penetration into areas with metal-to-metal overlap
  • An oil-based thixotropic corrosion inhibitor
  • Designed to protect equipment and fabricated parts during extended periods of outdoor storage
  • Designed for the protection of metals when exposed to outdoor weather conditions
  • Can be used for general-purpose preservation
  • Works well in domestic and overseas shipment where a "dry to touch" film is required
  • MIL-PRF-16173E Grade 1, Class 2
  • Designed for the protection of metals when exposed to outdoor weather conditions
  • Also for general purpose preservation, indoor or outdoor, with or without cover
  • Ideal for domestic and overseas shipment where a “dry to touch” film is required
  • MIL-PRF-16173E, Grade 1, Class 1
  • A petroleum based, solvent type, cold applied rust preventive
  • Deposits a grease-like film which gives versatility in application
  • MIL-PRF-16173E, Grade 2, Class 2
  • A petroleum based, solvent type, cold applied rust preventive
  • Deposits a grease like film which gives versatility in application
  • MIL-PRF-16173E, Grade 2, Class 1
  • For use where water or saline solution must be displaced from corrodible surfaces and the corrosion prevented or arrested
  • Designed for protection of interior surfaces of machinery, instruments or material under cover for limited periods
  • MIL-PRF-16173E Grade 3, Class 2
  • For use where water or saline solution must be displaced from corrodible surfaces and the corrosion prevented or arrested
  • Designed for protection of interior surfaces of machinery, instruments or material under cover for limited periods
  • MIL-PRF-16173E Grade 3, Class 1
  • A wax based, solvent type, cold applied, corrosion preventative
  • Designed for use on ferrous and non-ferrous metals
  • Ideal for metals exposed to indoor or outdoor storage conditions
  • MIL-PRF-16173-E, Grade 4, Class 1
  • Light oil water displacing corrosion preventive
  • Protects interiors of machines under cover
  • Will not clog dies of stamping machines
  • Penetrating light oil corrosion preventive compound
  • Permits parts to slide when in contact, avoiding a “gluing” condition.
  • Compatible with many lubricating oil systems
  • An inhibited, oil-type compound
  • Physically similar to an SAE 30 lubricating oil
  • Protects both ferrous and non-ferrous metals
  • Non-emulsifiable rust preventative and water displacer
  • Gives a protective film upon evaporation
  • Non-staining and virtually non-apparent with a sparkling luster
  • Rust preventive oil concentrate
  • Can be diluted with water or petroleum solvent
  • Applied by dipping, spraying, or flow coating
  • A solvent cutback corrosion preventive compound
  • Designed for the protection of ferrous metal
  • A solvent cutback, thixotropic, corrosion preventive compound
  • Designed for rustproofing transportation equipment
  • Cured film is firm and black
  • A low-order solvent cutback corrosion preventive compound
  • Protects metallic surfaces against corrosion
  • Designed for long-term indoor or outdoor exposure
  • A solvent cutback corrosion preventive
  • Designed for external protection of industrial machine parts in domestic and international shipments
  • The dry film is firm and black
  • A water displacing, solvent cutback corrosion preventive compound
  • Provides protection for industrial parts and transportation components
  • Also works as a lubricant and penetrant
  • MIL-C-15074E
  • QPL Reference Number AR-20-85
  • A water displacing, solvent cutback, oil concentrate corrosion preventive
  • Can be reduced with mineral spirits or higher flash point hydrocarbon solvents
  • Protects ferrous and non-ferrous industrial parts and transportation components
  • A water displacing, solvent cutback, oil based corrosion preventive
  • Also works as a lubricant and penetrant
  • A corrosion preventive, washing oil, and stamping lubricant
  • Designed for automotive applications
  • Provides excellent indoor protection for ferrous and non-ferrous metals
  • A solvent cutback corrosion preventive compound
  • The dry film is firm, amber, and translucent
  • Designed to protect industrial components and painted surfaces during domestic and international shipment
  • Also used to protect transportation equipment assemblies
  • A solvent cutback, corrosion preventive compound
  • Designed to protect ferrous and non-ferrous parts for indoor or covered storage and during shipment.
  • The cured film is compatible with a variety of oils and greases
  • MIL-PRF-16173E, Grade 2, Class 1
  • MIL-P-116J, Type P-2
  • A solvent cutback, corrosion preventive compound
  • Designed to protect ferrous and non-ferrous parts for indoor or covered storage and during shipment
  • The cured film is compatible with a variety of oils and greases
  • MIL-PRF-16173E, Grade 2, Class 2
  • MIL-P-116J, Type P-2
  • A solvent cutback corrosion preventive
  • The dry film is firm, amber, and translucent
  • Protects metallic surfaces against corrosion
  • A high solids, solvent cutback, general purpose corrosion preventive
  • Suitable for a wide range of application requirements
  • A high solids, water displacing, solvent cutback, general purpose corrosion preventive compound
  • Suitable for the widest range of application requirements
  • A solvent cutback corrosion preventive compound
  • Widely used as a high performance rustproofing coating for transportation equipment
  • A high flash, solvent cutback, water displacing corrosion preventive compound
  • Protects ferrous and non-ferrous industrial parts and transportation components
  • Works well in indoor or covered storage
  • The film is oily, light amber, and translucent
  • A solvent cutback, water displacing corrosion preventive compound
  • Designed to protect ferrous and non-ferrous industrial parts and transportation components
  • Ideal for covered shipment and inside storage
  • MIL-PRF-16173E, Grade 5, Class 1
  • MIL-C-23411A, Type 2
  • MIL-P-116J, Type P-21
  • A solvent cutback, water displacing corrosion preventive compound
  • Designed to protect ferrous and non-ferrous industrial parts and transportation components
  • Ideal for covered shipment and inside storage
  • MIL-PRF-16173E, Grade 5, Class 2
  • MIL-C-23411A, Type 2
  • MIL-P-116J, Type P-21
  • A polymeric, water emulsifiable corrosion preventive
  • Specifically formulated for coating phosphated and painted parts
  • Contains a special additive system that provides a durable, self-healing, corrosion resistant film
  • An oil base corrosion preventive
  • The dry film is oily, light bodied, and transparent
  • Excellent for the protection of steel sheets, coils, bars, and wire in storage or covered transit
  • A solvent cutback, water displacing corrosion preventive compound
  • The dry film is firm, amber, transparent, and non-tacky
  • Designed for long term protection of metal parts in outdoor uncovered conditions
  • A solvent cutback, water displacing, soft wax/oil base corrosion preventive
  • The film is thin, extremely light, oily, and translucent
  • Protects metal parts and components in shipment and storage where a high flash product is necessary
  • A corrosion preventive compound for ferrous and non-ferrous metals
  • The cured film is very thin, transparent, and slightly oily
  • Primarily intended as a steel mill "slushing compound" for the protection of galvanized steel tubing and coils during transit and storage
  • A solvent cutback, firm film, black asphaltic corrosion preventive compound
  • Provides long-term protection for metallic surfaces
  • Works in indoor or outdoor exposure and during international shipments
  • MIL-PRF-16173E, Grade 1, Class 1
  • MIL-P-116J, Type P-1
  • A solvent cutback, firm film, black asphaltic corrosion preventive compound
  • Provides long-term protection for metallic surfaces
  • Works in indoor or outdoor exposure and during international shipments
  • MIL-PRF-16173E, Grade 1, Class 2
  • MIL-P-116J, Type P-1
  • A solvent cutback, water displacing corrosion preventive compound
  • Designed to protect ferrous and non-ferrous precision equipment and parts
  • Works for indoor or covered storage and during shipment
  • A solvent cutback, water displacing corrosion preventive compound
  • Designed to protect ferrous and non-ferrous precision equipment and parts
  • Works for indoor or covered storage and during shipment

Coatings - Underbody Coatings

  • Aerosol Concentrate
  • Fast dry, rubberized coating
  • Formulated to provide a tough, flexible film
  • Aerosol Concentrate
  • Fast dry, rubberized coating
  • Formulated to provide a tough, flexible film
  • Aerosol Concentrate
  • Asphaltic inverted emulsion that provides a firm textured dry film.
  • Aerosol Concentrate
  • Fast dry, rubberized coating
  • Formulated to provide a tough, flexible film
  • Aerosol Concentrate
  • Solvent reduced rubberized coating formulated to dry quickly
  • Retains flexibility and provides a textured appearance
  • Aerosol Concentrate
  • An asphaltic, inverted emulsion black coating with a high rubber content
  • Aerosol Concentrate
  • An asphaltic, inverted emulsion dark brown to black coating having a low rubber content
  • Aerosol Concentrate
  • An asphaltic, inverted emulsion black coating having a low rubber content
  • Aerosol Concentrate
  • Supplied pre-thinned and lower viscosity for improved spray application
  • Quick dry time to facilitate wet weather application
  • Aerosol Concentrate
  • A sprayable mastic with insulating fillers
  • Controls condensation drip
  • Provides sound deadening and a vapor barrier
  • A firm film undercoating material formulated to provide corrosion protection, sound deadening and moisture sealing properties
  • Designed for the underside of highway trailers, bus bodies and automotive vehicles
  • A firm film undercoating material
  • Formulated to provide corrosion protection, sound deadening and moisture sealing properties to the underside of highway trailers, bus bodies and automotive vehicles
  • Composed of an abrasive free asphalt based material, dispersed in a petroleum solvent to provide a homogenous mastic type compound
  • Federal Specification TT-C-520-B
  • A firm film undercoating material
  • Provides corrosion protection, sound deadening and moisture sealing properties
  • Designed for the underside of highway trailers, bus bodies and automotive vehicles
  • Federal Specification TT-C-520-B
  • Designed to provide long-term protection for automotive underbodies
  • Can be applied by brush, low pressure airless or air-assisted equipment
  • Storage stable for one year
  • A thixotropic wax-gel rustproofing compound
  • Designed to provide a long-term protective film
  • For use on automotive primed and unprimed steel
  • Ford Tox Number: 196380 (aerosol) and 196544 (non-aerosol)
  • A thixotropic wax-based rustproofing compound
  • Designed to provide a long-term protective film
  • For use on automotive primed or unprimed steel
  • Mil-Spec AA-59295
  • Mil-C-62218-A
  • Mil-C-0083933
  • A thixotropic wax-based rustproofing compound
  • Designed to provide a long-term protective film
  • For use on automotive primed or unprimed steel.
  • MIL-C-62218-A
  • MIL-C-0083933
  • A solvent cutback, thixotropic corrosion preventive compound
  • Suitable for complete undercoating for transportation equipment
  • Provides sound deadening
  • Federal Specification TT-C-520B
  • Ideal for complete undercoating of transportation equipment
  • Provides superior sound deadening
  • Easy clean up with solvent-borne thinner, vapor degreasing, hot alkaline wash, or low pressure steam
  • Federal Specification TT-C-520B
  • A solvent cutback corrosion preventive compound
  • Suitable for complete undercoating for transportation equipment
  • Provides sound deadening
  • A solvent cutback corrosion preventive compound
  • Suitable for complete undercoating for automotive equipment
  • Provides sound deadening
  • A solvent cutback, thixotropic, corrosion preventive
  • Provides excellent weathering and corrosion protection for industrial applications
  • Recommended for use in the transportation industry as an undercoating and sound deadener
  • A firm film, solvent cutback, thixotropic corrosion preventive compound
  • Designed for excellent protection of ferrous metal
  • A solvent cutback, thixotropic corrosion preventive compound
  • Provides outstanding protection in marine, tropical, and industrial environments
  • A solvent cutback, thixotropic corrosion preventive compound
  • Provides outstanding protection in marine, tropical, and industrial environments
  • A solvent reduced rubberized coating
  • Dries quickly, retains flexibility
  • Provides a textured appearance
  • A solvent reduced rubberized coating
  • Dries quickly, retains flexibility
  • Provides a textured appearance
  • A firm film undercoating material
  • Provides corrosion protection, sound deadening and moisture sealing properties
  • Designed for rustproofing transportation equipment
  • Provides galvanic corrosion protection
  • Can be applied on battery terminals for insulating purposes
  • Dry film is translucent and semi-firm
  • Designed for rustproofing transportation equipment
  • Provides galvanic corrosion protection
  • Can be applied on battery terminals for insulating purposes
  • Dry film is translucent and semi-firm

Coatings - Volatile Corrosion Inhibitors (VCI)

  • A contact and volatile corrosion inhibiting compound
  • Designed as a preservative/additive for enclosed systems

Additives - Tectyl Reducer/Diluent

  • High performance solvent
  • Designed for the dilution and removal of TECTYL® solvent-borne coatings
Daubond NoxRust Tectyl VDamp TecPlex SACI