Inside US: 800.688.0459
Daubond® adhesives are the leading choice of top manufacturers.
We provide superior corrosion protection even in the toughest conditions.
Our sprayable liquid dampers are both high-performing and cost-effective.
Daubert continues to introduce innovations in sealants, lubricants and more.
Our research and development team is skilled at meeting unique product needs.
Daubert is an innovator in the field of adhesive technology. Our adhesive solutions meet the most stringent production and end use requirements. That's why Daubert adhesives are the choice of leading manufacturers.
Nox-Rust® products offer the broadest range of corrosion protection coatings. In more than 100 countries around the world, Nox-Rust products deliver proven performance for corrosion prevention as well as maintenance and operational lubrication.
For 75 years, Daubert has provided corrosion protection solutions that have greatly extended the life of a wide variety of manufactured products. Wherever there are tough conditions in transportation, mining, construction and other industries, there's Tectyl® protection there.
V-Damp is a range of viscoelastic, sprayable liquid vibration dampers and are very cost-effective compared to melt sheet pad systems. Manufacturers who choose V-Damp also find that V-Damp solutions actually enhance performance of their own products, too.
Our TecPlex® line of calcium sulfonate grease precursors and finished greases offers superior quality, performance and value than previously available. A new alternative for grease marketers and manufacturers.
Daubert’s SACI® corrosion inhibitors were developed for formulators and manufacturers of rust and corrosion preventive coatings and other functional products. Our sulfonate and oxidate concentrates can be used alone or in combination with asphalt, aliphatic and aromatic solvents, hydrocarbon resins, polymers and waxes.
Our research and development team is continually bringing products to market that address the specialty needs for lubricating fluids, engine protection, sealants and others.
An adhesive was needed to "drill the perfect hole."
Daubert provided a solution for protection of metal guide rails in transit.
Development of a low melt PUR adhesive for vinyl, used at lower temperatures.
Daubert reduced the stress on steel to reduce fracturing during the drawing process.
Sound deadening for the best stainless steel sinks in the world.
A low VOC, water-based underbody coating and cavity wax was needed.
Putting the customer first: yesterday and today.
A passion for the business.
Collaborations that inspire innovations.
Collaborations that inspire innovations.
Caring for the environment inside and out.
Newsworthy innovations and more.
Identifying and meeting customers' needs.
Woodworking
Our products are designed to work on a variety of surfaces and substrates, offering superior resistance to heat, cold, and water.
Choose an Industry
Woodworking
Daubond® 6360
- A high quality, solvent-free, two-part epoxy adhesive
- Designed to laminate vinyl film to various core substrates
- Supplied at ready-to-use viscosity
Ideal for situations when a very low VOC product is required. Excellent choice for substrates including wood, metal and some plastics. Color-coded pink and yellow for easy identification and mixing. Cures at room temperature. Laminates can be machined in 16 hours. Bonds with most vinyl films. Non-flammable.
Daubond® 6412
- Water-based ethylene/vinyl acetate laminating adhesive
- Exhibits excellent bonds to most commercial papers used in wood core stock laminates
Daubond® 6446A
- Very high solids waterborne adhesive
- Designed to laminate vinyl film to various core materials
Based on a modified vinyl acetate ethylene copolymer. Works well on substrates including luaun, particleboard, and gypsum. Improved heat resistance can be achieved by crosslinking with Daubond® 6429B, 6468B, or 6500B.
Daubond® 6477M3
- A waterborne polyurethane adhesive
- Designed for membrane pressing veneer and PVC films to various core substrates
Works well on MDF, particle board, and similar substrates. Part "A" may be used by itself or mixed with Part "B" if a more heat-resistant bond is required.
Daubond® 6479GM2
- A one-part, waterborne adhesive
- Designed to adhere polystyrene and ABS to concrete
The required open time will vary with the adhesive film thickness and ambient temperature/humidity. Ten to thirty minutes is normally sufficient.
Daubond® 6493A
- A waterborne polyurethane adhesive
- Designed for membrane pressing veneer and PVC films to various core substrates
Works well on substrates including MDF and particleboard. Part "A" may be used by itself or mixed with Part "B" if a more heat-resistant bond is required. Exhibits a mildly thixotropic rheology for improved holdout and spray characteristics.
Daubond® 6549
- A liquid moisture-curing, one-component reactive adhesive
- 25-minute open time
- Available in 500-ml squeeze bottles or 7-gallon pails
Reacts with moisture present in the surrounding air. Also reacts in some substrates (wood, etc.), to become a crosslinked, thermoset adhesive. Expands as it cures, filling gaps and further penetrating porous substrates. Typical applications include: bonding of windows and doors, wood joint bonding for outdoor use, bonding ceramic materials, concrete, hard foams.
Daubond® 6550
- A liquid moisture-curing, one-component reactive adhesive
- 6-8 minute open time
- Available in 500-ml squeeze bottles or 7-gallon pails
Reacts with moisture present in the surrounding air, and in some substrates (wood, etc.), to become a crosslinked, thermoset adhesive. Expands as it cures, filling gaps and further penetrating porous substrates. Typical applications include: bonding of wood, polystyrene foams, vinyl, mineral boards, sheet aluminum, cement board.
Daubond® 8791
- Two-part modified epoxy emulsion
- Designed to bond printed rice papers to wood and wood products
Reinforces board and enhances surface hardness. Excellent wet tack, and color coded for easy identification and mixing. Cures to handle overnight.
Daubond® 8808
- A two-part modified epoxy adhesive
- Designed to adhere vinyl film to various substrates
- Excellent resistance to plasticizer migration
Superior performance on substrates including wood, particle board, masonite, metal, concrete and many plastics. The bond strength produced is normally in excess of the vinyl film itself. Color-coded pink and yellow for easy identification and mixing. Cures to handling strength at room temperature overnight. Supplied at ready to use viscosity.
Daubond® 8818
- Two-part, modified epoxy adhesive
- Designed to laminate vinyl film to particle board
- Bonds most vinyl films
Color-coded pink and yellow for easy identification and mixing. Cures to handling strength at room temperature overnight. Supplied at ready-to-use viscosity. Good tack combined with a long coater life.
Daubond® 8818HV
- A two-part, modified epoxy adhesive
- Designed to laminate vinyl film to particle board
- Bonds most vinyl films
Cures to handling strength at room temperature overnight. Good tack combined with a long coater life. Supplied at ready-to-use viscosity.
Daubond® 8855
- A high quality, solvent free, two-part, modified epoxy adhesive
- Designed to laminate vinyl film to various core substrates,
- Should be used where a very low VOC product is required
Works well on substrates including wood, metal and some plastics. Bonds most vinyl films. Not recommended for standard reverse printed vinyl films. Each part is color coded for easy identification and mixing. Cures at room temperature. Laminates can be machined in 16 hours. Supplied at ready-to-use viscosity. Non-flammable.
Daubond® 8855 AL&BL
- A high quality, solvent-free, two-part, modified epoxy adhesive
- Designed to laminate vinyl film to various core substrates
- Should be used where a very low VOC product is required
Excellent choice for substrates including wood, metal and some plastics. Bonds most vinyl films (not recommended for standard reverse printed vinyl films).Color coded red and yellow for easy identification and mixing. Cures at room temperature. Laminates can be machined in 16 hours. Supplied at ready-to-use viscosity. Non-flammable.
Daubond® U6000 Series
- Moisture-curing, one-component reactive polyurethanes
- Reacts with either supplied moisture, moisture in the air or moisture-containing substrates
- Exhibits good resistance to heat, cold and water
Reaction with water creates a strong, crosslinked, thermoset bond. Expands as it cures, filling gaps and further penetrating porous substrates. Typical applications include: bonding of windows and doors, wood joint bonding for outdoor use, bonding ceramic materials, concrete, hard foams
Daubond® U8015
- A one component, reactive hot melt adhesive
- Designed for assembly applications requiring an excellent green strength and fast set
- Available in drums and 7-gallon pails
- 45-second open time
Reacts with moisture present in the surrounding air, and in some substrates (wood, etc.), to become a crosslinked, thermoset adhesive. When cured, exhibits good resistance to heat, cold, and water.
Daubond® U8050
- A one component, reactive hot melt adhesive
- Designed for assembly applications requiring an excellent green strength and fast set
- Available in drums and 7-gallon pails
- 180-second open time
Reacts with moisture present in the surrounding air, and in some substrates (wood, etc.), to become a crosslinked, thermoset adhesive. When cured, is suitable for general-purpose assembly bonding, as well as wrapping vinyl films, resin impregnated paper foils, and wood veneer strips to various profiles (e.g., PVC and aluminum).
Daubond® U8102
- A one-component, reactive hot melt adhesive
- Designed for assembly applications requiring a rapid set time and excellent green strength
- Offers good resistance to heat, cold, and water
Reacts with moisture present in the surrounding air and in some substrates (wood, etc.), to become a crosslinked thermoset adhesive. When cured, the product exhibits good resistance to heat, cold, and water. Can be applied with a small roller applicator or a slot die.
Daubond® U8104
- A one component, reactive hot melt adhesive
- Offers good resistance to heat, cold and water
- Works on various core substrates
Used to wrap PVC, paper and veneer to various core substrates. Reacts with moisture present in the surrounding air, and in some substrates (wood, etc.), to become a crosslinked, thermoset adhesive. When cured, Exhibits good resistance to heat, cold, and water. Can be applied with an extrusion or swirlspray gun, roller coater, or slot die.
Daubond® U8106
- A one component, reactive hot melt adhesive
- Offers good resistance to heat, cold and water
Reacts with moisture present in the surrounding air, and in some substrates (wood, etc.), to become a crosslinked, thermoset adhesive. When cured, the product exhibits good resistance to heat, cold, and water. May be used to wrap PVC, paper and veneer to various core substrates. Can be applied with an extrusion or swirlspray gun, roller coater, or slot die.
Daubond® U8112
- A one component, reactive hot melt adhesive
- Offers good resistance to heat, cold and water
Reacts with moisture present in the surrounding air, and in some substrates (wood, etc.), to become a crosslinked, thermoset adhesive. When cured, the product exhibits good resistance to heat, cold, and water. May be used to wrap PVC, paper and veneer to various core substrates. Can be applied with an extrusion or swirl spray gun, roller coater, or slot die.
Daubond® U8114
- A one component, reactive hot melt adhesive
- Designed for assembly applications requiring a rapid set time and excellent green strength
Reacts with moisture present in the surrounding air and in some substrates (wood, etc.), to become a crosslinked thermoset adhesive. When cured, the product exhibits good resistance to heat, cold, and water. Can be applied with a small roller applicator, or a slot die.
Daubond® U8120
- A one component, reactive hot melt adhesive.
- Designed to wrap PVC, paper and veneer to various core substrates.
- Economical product for profile wrapping and edge banding applications.
Reacts with moisture present in the surrounding air, and in some substrates (wood, etc.) to become a crosslinked, thermoset adhesive. When cured, the product exhibits good resistance to heat, cold, and water. Can be applied with an extrusion or swirlspray gun, roller coater or slot die.
Industry Leadership Since 1935
Daubert Chemical Company has held a leadership role in providing Specialty Coatings and Adhesives, since 1935. Serving the steel, automotive transportation and general manufacturing industries, Daubert has focused on corrosion prevention coatings, industrial anti-skid coatings, sound deadening coatings, specialty adhesives, as well as concentrate formulations to service the aerosol packaging industry.
© 2011 Daubert Chemical Company