• A petroleum based sheet metal processing lubricant and preservative
• Designed for use in blankers and high speed auto-shear
• Also works as a wash to provide lubrication with a rust inhibiting film.

Can also be used in press line lubricant applicators and blank washers as a wash, stamping lubricant to protect against rust after forming, as well as a rust preventive spray on formed parts. Acceptable as a preservative and lubricant on sheet and coil, and is non-interfering with Body and Assembly sealers, adhesives and preconditioning systems.

• Works as a preservative and lubricant on sheet and coil
• Non-interfering with Body and Assembly sealers, adhesives and preconditioning systems
• Specifically designed to minimize odor during use normally associated with traditional sheet metal processing lubricants

A petroleum based sheet metal processing lubricant and preservative designed for use in blankers and high speed auto-shear as a wash designed to provide lubrication and leave behind a rust inhibiting film. Also used in press line lubricant applicators and blank washers as a wash, stamping lubricant to protect against rust after forming, as well as a rust preventive spray on formed parts.

• A water-soluble mineral oil blended with effective emulsifiers, polar rust inhibitors and lubricity aids
• Provides excellent emulsion stability and rust protection

Recommended for sawing, turning, milling, boring and grinding. Its balanced properties make it the soluble oil for most job shop needs.

• Designed for the heavier duty machining operations
• Works on both ferrous and non-ferrous metals

A water soluble machining and grinding fluid fortified with fatty oils to give it excellent lubricity characteristics.

• An effective water displacing rust preventative compound
• Will not emulsify, even in the presence of alkalis
• Quickly separates water displaced from metal surfaces after machining or cleaning operations

The protective film left on the metal after evaporation of the solvent is ultra-thin, non-staining, and highly protective. Conforms to all the requirements of MIL-C-0081309, Grade II.

• A solvent cut thin film rust preventive
• Designed to protect metal surfaces during transit and storage
• Can be applied by dip, spray or brush

Provides a non-discernible thin waxy protective film. Dipping is an easy application for spare parts. Also used in areas such as springs, sprockets and chains of motorcycles, heavy equipment and automobiles that require corrosion protection prior to use.

• A barium free, moisture displacing solvent cutback rust preventive
• non-emulsifiable rust preventive and water displacer
• Provides a protective film that is non-staining and non-discernable

Applicable to most plant and inter plant operations after electroplating and surface conversion processes. Provides protection for interiors of machines under cover and particularly will not clot dies of stamping machines. Uses include: springs, stampings, saws, machine tools, engines, compressors, refrigeration and aviation parts, precision tools, gear shafts, sockets, hammers, cutting tools, taps, drills, bearings, knife blades, gear parts and cold rolled steel, and many other applications.

• Water soluble corrosion inhibitor
• Eliminates hazards associated with the use of oil
• Designed for use as a cleaning agent for coiled steel and coated steel products

A synthetic water-based fluid that does not contain any oil or oil-based material. Effectively removes dirt and debris from steel prior to applying mill oils and coiling. When used alone, supplies a high level of temporary protection to metal surfaces as well as application machinery.

• Acts as both a lubricant and preservative
• Acceptable as a preservative and lubricant on sheet and coil
• Non-interfering with body and assembly sealers, adhesives and pre-conditioning systems

A petroleum based sheet metal processing lubricant and preservative designed for use on coiled stock as a combination rust preventive and pre-lube, in blankers and high speed auto-shear as a wash designed to leave behind both a lubrication and rust inhibiting film. It is also used in press line lubricant applicators and blank washers as a wash, stamping lubricant to protect against rust after forming, and as a rust preventive spray on formed parts.

• Multi-purpose draw lubricant, blank cleaner, flex roll lubricant, and rust preventive for cold rolled sheet and galvanized coated steel
• Can also be used as a rust preventive spray on formed parts
• Acceptable as a preservative and lubricant on sheet and coil

A petroleum based sheet metal processing lubricant and preservative designed for use in blankers and high speed auto-shear machines. Provides both lubrication and a rust inhibiting film. Also for use in press line lubricant applicators and blank washers as a wash, stamping lubricant to protect against rust after forming. Non-interfering with Body and Assembly sealers, adhesives and pre-conditioning systems. The material is applied, as received, by dip, spray or roll coater application.

Low viscosity petroleum based rust preventive compound designed to give good stain-stack protection for cold-rolled steel and various alloyed steels.

• A petroleum-based product corrosion preventive for use in acid fume environments.
• Designed for use as an edge coating for steel coils

Designed for use in acid fume environments such as pickling operations. Also provides nonstaining, water-displacing, and high humidity protection of steel parts and equipment during storage.

• A petroleum-based product corrosion preventive for use in acid fume environments.
• Designed for use as an edge coating for steel coils

Designed for use in acid fume environments such as pickling operations. Also provides non-staining, water-displacing, and high humidity protection of steel parts and equipment during storage.

• Light oil water displacing corrosion preventive
• Protects interiors of machines under cover
• Will not clog dies of stamping machines.

A superior choice for use on: springs, stampings, saws, machine tools, engines, compressors, refrigeration and aviation parts, watchmaker and precision tools, gear shafts, sockets, hammers, cutting tools, steel plates, taps, drills, bearings, bearing races, knife blades, gear parts and cold rolled steel, and many other applications.

• Penetrating light oil corrosion preventive compound
• Permits parts to slide when in contact, avoiding a “gluing” condition.
• Compatible with many lubricating oil systems

Deposits a thin, oily film that exhibits excellent protection, as well as water displacing, lubricating and penetrating properties. Penetrates into crevices and areas not reached by spray and brush coating, ensuring total coverage. Its extremely short drain period eliminates excessive drip and in-process handling time.

• A petroleum based sheet metal processing lubricant and preservative
• Designed for use on coiled stock as a combination rust preventive and pre-lube
• Approved by both Ford and General Motors

Coats as a lubricant and rust preventive film. Also used as a rust preventive spray on steel and steel parts. Approved as a preservative and lubricant on sheet and coiled steel in the automobile industry as it is non-interfering with body and assembly. Protects coiled stock in an acid fume environment.

• A petroleum based sheet metal processing lubricant and preservative
• Designed for use on coiled stock as a combination rust preventive and pre-lube
• Approved as a preservative and lubricant on sheet and coiled steel for both Ford and General Motors

Works well in blankers (auto-shear) as a wash that leaves behind a lubricant and rust preventive film. Also used as a rust preventive spray on steel and steel parts. Non-interfering with body and assembly sealers, adhesives, and cleaning systems. Protects coiled stock in an acid fume environment.

• An inhibited, oil-type compound
• Physically similar to an SAE 30 lubricating oil
• Protects both ferrous and non-ferrous metals

Ideal for the protection of precision assemblies such as the interiors of pumps, gear housings, transmissions, differentials, fuel tanks, carburetors and other types of equipment having precision and polished surfaces. Can also be used as a flush for lubrication, hydraulic and coolant systems, as well as journals and journal boxes.

• Provides up to six months protection inside on steel
• Up to twelve months protection against rust when packaged
• Excellent oxidation resistance and no corrosive effect on non-ferrous metals

A light preservative oil especially suited for precision instruments, firearms, and other close tolerance mechanisms as well as for their individual components. Differs from ordinary rust preventive oils in that it is also an excellent lubricant.

• Non-emulsifiable rust preventative and water displacer
• Gives a protective film upon evaporation
• Non-staining and virtually non-apparent with a sparkling luster

Used for the protection of interiors of machines under cover, and will not clog dies of stamping machines. Applications include: springs, stampings, saws, machine tools, engines, compressors, refrigeration, and aviation parts, watchmaker and precision tools, gear shafts, sockets, hammers, cutting tools, steel plates, taps, drills, bearings, bearing races, knife blades, gear parts, and cold rolled steel. Displaces moisture, and will not emulsify in the presence of alkali. Quickly separates alkaline water displaced from metal surfaces.

• An oil-based thrixotropic corrosion inhibitor
• Designed to protect equipment and fabricated parts during extended periods of outdoor storage

The film is a soft, grease-like self-healing coating that can be applied by brush or spray operations. Becomes fluid with agitation.

• Rust preventive oil concentrate
• Can be diluted with water or petroleum solvent
• Applied by dipping, spraying, or flow coating

Designed for use in retarding corrosion during shipment and storage of machined parts, tools, phosphate treated steel, finished assemblies, and many other in-plant applications. The duration of protection is dependent on the degree of dilution. Water dilution works where safety regulations prohibit the use of volatile solvents.

• An emulsified rust preventive oil
• Designed for use in retarding corrosion during shipment and storage
• Works well with machined parts, tools, phosphate treated steel, finished assemblies, and other similar surfaces

A versatile product for use in many in-plant applications. Ideal choice when safety regulations prohibit the use of volatile solvents.

• A solvent cutback corrosion preventive compound
• Designed for the protection of ferrous metal

The dry film is firm and black. Recommended for applications where a firm film coating with weathering is required.

• A water displacing, solvent cutback corrosion preventive compound
• Provides protection for industrial parts and transportation components
• Also works as a lubricant and penetrant

The film is an ultralight, transparent oil that has fingerprint suppressor and removal capabilities. Approved under Military Specification MIL-C-15074E, QPL Reference Number AR-20-85.

• A water displacing, solvent cutback, oil concentrate corrosion preventive
• Can be reduced with mineral spirits or higher flash point hydrocarbon solvents
• Protects ferrous and non-ferrous industrial parts and transportation components

• A water displacing, solvent cutback, oil based corrosion preventive
• Also works as a lubricant and penetrant

The film is an ultralight, transparent, non-staining oil. Used to protect industrial parts during long-term indoor or covered storage, and during domestic shipment.

• A corrosion preventive, washing oil, and stamping lubricant
• Designed for automotive applications
• Provides excellent indoor protection for ferrous and non-ferrous metals

• A water emulsifiable, oil concentrate corrosion preventive compound
• The film is thin and oily

• A solvent-free oily film anti-corrosion product
• Film does not become dry or brittle with aging

Designed to prevent corrosion on metal parts and/or enclosures such as hydraulic circuits.

• An oil concentrate corrosion preventive
• The film is oily, transparent and non-staining
• Designed to be diluted with mineral spirits for optimum performance

• A solvent cutback, corrosion preventive compound
• Designed to protect ferrous and non-ferrous parts for indoor or covered storage and during shipment.
• The cured film is compatible with a variety of oils and greases

Semi-firm film that is amber and translucent. Approved under Military Specifications MIL-PRF-16173E, Grade 2, for Class I, and MIL-P-116J, Type P-2.

• A solvent cutback, corrosion preventive compound
• Designed to protect ferrous and non-ferrous parts for indoor or covered storage and during shipment
• Compatible with a variety of oils and greases

The semi-firm film is amber and translucent. Approved under Military Specifications MIL-PRF-16173E, Grade 2, for Class II, and MIL-P-116J, Type P-2.

• A solvent cutback, water displacing corrosion preventive compound
• Designed to protect ferrous and non-ferrous industrial parts and transportation components
• Ideal for covered shipment and inside storage

The semi-firm film is oily, light amber, and translucent. Approved under Military Specifications MIL-PRF-16173E, Grade 5, for Class I; MIL-C-23411A, Type II; and MIL-P-116J, Type P-21.

• A solvent cutback, water displacing corrosion preventive compound
• Designed to protect ferrous and non-ferrous industrial parts and transportation components
• Ideal for covered shipment and inside storage

The semi-firm film is oily, light amber, and translucent. Approved under Military Specifications MIL-PRF-16173E, Grade 5, for Class II; MIL-C-23411A, Type II; and MIL-P-116J, Type P-21.

• An oil base corrosion preventive
• The dry film is oily, light bodied, and transparent
• Excellent for the protection of steel sheets, coils, bars, and wire in storage or covered transit

• A corrosion preventive compound for ferrous and non-ferrous metals
• The cured film is very thin, transparent, and slightly oily
• Primarily intended as a steel mill "slushing compound" for the protection of galvanized steel tubing and coils during transit and storage

• A water displacing, penetrating and lubricating biodegradable corrosion preventive
• Protects ferrous and non-ferrous industrial parts during storage and covered transit
• Completely biodegradable

This product is formulated with esters of soybean and other materials that will easily biodegrade