Inside US: 800.688.0459
Daubond® adhesives are the leading choice of top manufacturers.
We provide superior corrosion protection even in the toughest conditions.
Our sprayable liquid dampers are both high-performing and cost-effective.
Daubert continues to introduce innovations in sealants, lubricants and more.
Our research and development team is skilled at meeting unique product needs.
Daubert is an innovator in the field of adhesive technology. Our adhesive solutions meet the most stringent production and end use requirements. That's why Daubert adhesives are the choice of leading manufacturers.
Nox-Rust® products offer the broadest range of corrosion protection coatings. In more than 100 countries around the world, Nox-Rust products deliver proven performance for corrosion prevention as well as maintenance and operational lubrication.
For 75 years, Daubert has provided corrosion protection solutions that have greatly extended the life of a wide variety of manufactured products. Wherever there are tough conditions in transportation, mining, construction and other industries, there's Tectyl® protection there.
V-Damp is a range of viscoelastic, sprayable liquid vibration dampers and are very cost-effective compared to melt sheet pad systems. Manufacturers who choose V-Damp also find that V-Damp solutions actually enhance performance of their own products, too.
Our TecPlex® line of calcium sulfonate grease precursors and finished greases offers superior quality, performance and value than previously available. A new alternative for grease marketers and manufacturers.
Daubert’s SACI® corrosion inhibitors were developed for formulators and manufacturers of rust and corrosion preventive coatings and other functional products. Our sulfonate and oxidate concentrates can be used alone or in combination with asphalt, aliphatic and aromatic solvents, hydrocarbon resins, polymers and waxes.
Our research and development team is continually bringing products to market that address the specialty needs for lubricating fluids, engine protection, sealants and others.
An adhesive was needed to "drill the perfect hole."
Daubert provided a solution for protection of metal guide rails in transit.
Development of a low melt PUR adhesive for vinyl, used at lower temperatures.
Daubert reduced the stress on steel to reduce fracturing during the drawing process.
Sound deadening for the best stainless steel sinks in the world.
A low VOC, water-based underbody coating and cavity wax was needed.
Putting the customer first: yesterday and today.
A passion for the business.
Collaborations that inspire innovations.
Collaborations that inspire innovations.
Caring for the environment inside and out.
Newsworthy innovations and more.
Identifying and meeting customers' needs.
Composite Wall and Door
Manufacturers stick to our Daubond® line of PUR and specialty adhesives to meet their lamination needs year after year, product after product
Choose an Industry
Composite Wall and Door
Daubond® 6549
- A liquid moisture-curing, one-component reactive adhesive
- 25-minute open time
- Available in 500-ml squeeze bottles or 7-gallon pails
Reacts with moisture present in the surrounding air. Also reacts in some substrates (wood, etc.), to become a crosslinked, thermoset adhesive. Expands as it cures, filling gaps and further penetrating porous substrates. Typical applications include: bonding of windows and doors, wood joint bonding for outdoor use, bonding ceramic materials, concrete, hard foams.
Daubond® 6550
- A liquid moisture-curing, one-component reactive adhesive
- 6-8 minute open time
- Available in 500-ml squeeze bottles or 7-gallon pails
Reacts with moisture present in the surrounding air, and in some substrates (wood, etc.), to become a crosslinked, thermoset adhesive. Expands as it cures, filling gaps and further penetrating porous substrates. Typical applications include: bonding of wood, polystyrene foams, vinyl, mineral boards, sheet aluminum, cement board.
Daubond® 8022
(Available in 10-oz. cartridges only)
- A one component, reactive hot melt adhesive
- Suitable for general-purpose assembly bonding
- One-minute open time
Reacts with moisture present in the surrounding air, and in some substrates (wood, etc.), to become a crosslinked, thermoset adhesive. When cured, exhibits good resistance to heat, cold, and boiling water. Also works well for applications including wrapping vinyl films, resin impregnated paper foils, and wood veneer strips to various profiles (e.g., PVC and aluminum). When cured, the product is serviceable from –40°C to more than 100°C, depending on the substrates.
Daubond® 8032
(Available in 10-oz. cartridges only)
- A one component, reactive hot melt adhesive
- Suitable for general-purpose assembly bonding
- 1.5 minute open time
Reacts with moisture present in the surrounding air, and in some substrates (wood, etc.), to become a crosslinked, thermoset adhesive. When cured, exhibits good resistance to heat, cold, and water. Also designed for application on wrapping vinyl films, resin impregnated paper foils, and wood veneer strips to various profiles (e.g., PVC and aluminum).
Daubond® 8050
(Available in 10-oz. cartridges only)
- A one component, reactive hot melt adhesive
- Suitable for general-purpose assembly bonding
- 3-minute open time
8050 will react with moisture present in the surrounding air, and in some substrates (wood, etc.), to become a crosslinked, thermoset adhesive. When cured, 8050 exhibits good resistance to heat, cold, and water. 8050 is suitable for general-purpose assembly bonding, as well as wrapping vinyl films, resin impregnated paper foils, and wood veneer strips to various profiles (e.g., PVC and aluminum). 8050 is ideal for large surfaces that require a long open time.
Daubond® 8855
- A high quality, solvent free, two-part, modified epoxy adhesive
- Designed to laminate vinyl film to various core substrates,
- Should be used where a very low VOC product is required
Works well on substrates including wood, metal and some plastics. Bonds most vinyl films. Not recommended for standard reverse printed vinyl films. Each part is color coded for easy identification and mixing. Cures at room temperature. Laminates can be machined in 16 hours. Supplied at ready-to-use viscosity. Non-flammable.
Daubond® U8015
- A one component, reactive hot melt adhesive
- Designed for assembly applications requiring an excellent green strength and fast set
- Available in drums and 7-gallon pails
- 45-second open time
Reacts with moisture present in the surrounding air, and in some substrates (wood, etc.), to become a crosslinked, thermoset adhesive. When cured, exhibits good resistance to heat, cold, and water.
Daubond® U8050
- A one component, reactive hot melt adhesive
- Designed for assembly applications requiring an excellent green strength and fast set
- Available in drums and 7-gallon pails
- 180-second open time
Reacts with moisture present in the surrounding air, and in some substrates (wood, etc.), to become a crosslinked, thermoset adhesive. When cured, is suitable for general-purpose assembly bonding, as well as wrapping vinyl films, resin impregnated paper foils, and wood veneer strips to various profiles (e.g., PVC and aluminum).
Daubond® U8200
- A one component, reactive hot melt adhesive
- Designed for flat laminating applications requiring a low application temperature
- Available in drums and 7-gallon pails
Reacts with moisture present in the surrounding air, and in some substrates (wood, etc.), to become a crosslinked, thermoset adhesive. When cured, the product exhibits good resistance to heat, cold, and water. Can be applied with an extrusion or swirlspray gun; roller coater; or slot die.
Daubond® U8501
- A one component, reactive hot melt adhesive
- Designed for flat laminating applications
- Offers excellent green strength
- Available in drums and 7-gallon pails
- Approximate 45-second open time
Reacts with moisture present in the surrounding air, and in some substrates (wood, etc.), to become a crosslinked, thermoset adhesive. When cured, the product exhibits good resistance to heat, cold, and water. Can be applied with an extrusion or swirlspray gun; roller coater; or slot die.
Daubond® U8504
- A one component, reactive hot melt adhesive
- Designed for flat laminating applications
- Also provides excellent green strength
- Available in drums and 7-gallon pails
- Approximate 6-minute open time
Reacts with moisture present in the surrounding air, and in some substrates (wood, etc.), to become a crosslinked, thermoset adhesive. When cured, the product exhibits good resistance to heat, cold, and water. Can be applied with an extrusion or swirlspray gun; roller coater; or slot die.
Daubond® U8505
- A one component, reactive hot melt adhesive
- Designed for flat laminating applications
- Also provides excellent green strength
- Available in drums and 7-gallon pails
- Approximate 4-minute open time
Reacts with moisture present in the surrounding air, and in some substrates (wood, etc.), to become a crosslinked, thermoset adhesive. When cured, the product exhibits good resistance to heat, cold, and water. Can be applied with an extrusion or swirlspray gun, roller coater; or slot die.
Daubond® U8506
- A one component, reactive hot melt adhesive
- Designed for flat laminating applications
- Available in drums and 7-gallon pails
- Approximate 2-minute open time
Reacts with moisture present in the surrounding air, and in some substrates (wood, etc.), to become a crosslinked, thermoset adhesive. When cured, the product exhibits good resistance to heat, cold, and water. Can be applied with an extrusion or swirlspray gun, roller coater,or slot die.
Industry Leadership Since 1935
Daubert Chemical Company has held a leadership role in providing Specialty Coatings and Adhesives, since 1935. Serving the steel, automotive transportation and general manufacturing industries, Daubert has focused on corrosion prevention coatings, industrial anti-skid coatings, sound deadening coatings, specialty adhesives, as well as concentrate formulations to service the aerosol packaging industry.
© 2011 Daubert Chemical Company