• A one-part, ambient applied solvent based styrene butadiene sealant
• Designed to afford a non-hardening, water resistant bead for sealing rainshield liners to inside door panels

Handles well and will not "cob web" at the initial application nor on aging. Product is ambient temperature applied, so the cost and maintenance of the application equipment is minimized.

Adhesive, epoxy, one component per Ford Engineering Specification ESH-M2G251-A

• A firm film undercoating material
• formulated to provide corrosion protection, sound deadening and moisture sealing properties
• Designed for the underside of highway trailers, bus bodies and automotive vehicles

• Provides superior protection against salt spray and humidity
• Approximate dry to touch time is 2 to 4 hours
• Offers easy removal from surface and clothing

A solvent-borne corrosion preventive compound designed for rustproofing new and used vehicles. Nox-Rust® 1553 is a translucent, amber, semi-firm film coating approved by OEM manufacturers.

• Can be applied using airless, air-assisted airless, or conventional spray equipment
• Excellent adhesion to cold rolled steel, electrocoat primer, and automotive topcoat clearcoat

An alkyd-based, fast drying, blackout paint designed for use on automotive underbody, wheelhouse, and chassis components. Dries to touch in 15 minutes. Can be removed with mineral spirits up to 45 minutes after application.

• Repels water, self-heals, and remains flexible to prevent chipping or cracking
• Recommend in use wherever a water displacing, long term, inner body corrosion preventive is needed
• Normally applied by low pressure airless spray equipment with accessory spray wands capable of coating critical areas through existing openings or drilled 1/2 inch access holes

A metallo-organic, polar type rustproofing compound specifically designed to protect enclosed automotive body sections. This rustproofing compound has a thin gel, but low viscosity that allows for film build on vertical surfaces and for seam penetration (capillary action) into areas with metal-to-metal overlap. The resulting film is amber in color.

• Designed to provide a long-term protective film for automotive primed and unprimed steel
• Can be applied using low pressure airless or air assisted airless equipment using accessory spray wands
• Formulated to pass all the requirements of Honda's Specification titled Test Method on Wax

A low color, translucent rustproofing compound with a thin gel, but low viscosity. This allows for film builds on vertical surfaces and for seam penetrations (capillary action) into areas with metal-to-metal overlap. The resulting film is wax-like in nature and will repel water, self-heal and remain flexible at low temperatures. Dry time is 4 hours to touch and overnight for full cure.

A high solids, cavity wax designed to provide long-term protection for enclosed automotive body sections. This rust preventative compound has a thin gel, but low viscosity, that allows for film builds on vertical surfaces and for seam penetration into areas with metal-to-metal overlap. The resulting film is wax-like in nature, and will repel water, self-heal, remain flexible at low temperatures, and provide corrosion protection for automotive primed and unprimed surfaces.

• A firm film undercoating material
• Formulated to provide corrosion protection, sound deadening and moisture sealing properties to the underside of highway trailers, bus bodies and automotive vehicles
• Composed of an abrasive free asphalt based material, dispersed in a petroleum solvent to provide a homogenous mastic type compound

Possesses a heavy consistency that has been achieved without the incorporation of asbestos fibers. Specifically formulated to pass the requirements of Federal Specification TT-C-520-B.

• A firm film undercoating material
• Provides corrosion protection, sound deadening and moisture sealing properties
• Designed for the underside of highway trailers, bus bodies and automotive vehicles

Composed of an abrasive free asphalt based material, and dispersed in a petroleum solvent to provide a homogenous mastic type compound. This product's heavy consistency is achieved without the incorporation of asbestos fibers. Specially formulated to pass the requirements of Federal Specification TT-C-520-B.

• Acts as both a lubricant and preservative
• Acceptable as a preservative and lubricant on sheet and coil
• Non-interfering with body and assembly sealers, adhesives and pre-conditioning systems

A petroleum based sheet metal processing lubricant and preservative designed for use on coiled stock as a combination rust preventive and pre-lube, in blankers and high speed auto-shear as a wash designed to leave behind both a lubrication and rust inhibiting film. It is also used in press line lubricant applicators and blank washers as a wash, stamping lubricant to protect against rust after forming, and as a rust preventive spray on formed parts.

• Superior protective for automotive bodies
• Will not stain automotive body paints
• Repels water, self heals itself, and remains flexible

A metallo-organic, polar type rust proofing compound specifically designed to protect enclosed automotive body section. This rust proofing compound has a thin gel, but low viscosity that allows for film build on vertical surfaces and for seam penetration into areas with metal-to-metal overlap. The resulting film is amber in color. The dried film can be removed by using a mineral spirits or a kerosene soaked rag.

• Multi-purpose draw lubricant, blank cleaner, flex roll lubricant, and rust preventive for cold rolled sheet and galvanized coated steel
• Can also be used as a rust preventive spray on formed parts
• Acceptable as a preservative and lubricant on sheet and coil

A petroleum based sheet metal processing lubricant and preservative designed for use in blankers and high speed auto-shear machines. Provides both lubrication and a rust inhibiting film. Also for use in press line lubricant applicators and blank washers as a wash, stamping lubricant to protect against rust after forming. Non-interfering with Body and Assembly sealers, adhesives and pre-conditioning systems. The material is applied, as received, by dip, spray or roll coater application.

Low viscosity petroleum based rust preventive compound designed to give good stain-stack protection for cold-rolled steel and various alloyed steels.

• Designed to provide long-term protection for automotive underbodies
• Can be applied by brush, low pressure airless or air-assisted equipment
• Storage stable for one year

A wax based rustproofing compound designed to provide long-term protection of automotive underbodies. Acts as a thixotropic undercoating that can be applied to moderate film thickness without dripping. The resulting film will dry to a firm film that will self heal when damaged.

• A petroleum based sheet metal processing lubricant and preservative
• Designed for use in blankers and high speed auto-shear and in press line lubricant applicators and blank washers
• Also works as a rust preventive spray on formed parts

Acceptable as a preservative and lubricant on sheet and coil, and is non-interfering with Body and Assembly sealers, adhesives and pre-conditioning systems. Also performs as a multi-purpose draw lubricant, blank cleaner, flex roll lubricant, and rust preventive for cold rolled sheet and galvanized coated steel. The material is applied, as received, for forming automotive parts by dip, spray or roll coater application.

• Protects against normal oxidation and weathering
• Helps protect the surface from marring or scratching
• Eliminates water spotting from acidic rains or hard water

A water based engine coating designed to protect unfinished metal and industrial finishes against the damaging effects of acid and solid particle fallout during transit and storage. It deposits a thin, clear film that is dry and tack-free to prevent dust and dirt pick-up.

• A zero V.O.C., ambient cure coating
• Formulated to provide an abrasion resistant film
• Similar performance properties to the current P.V.C. used on automotive underbodies

Can be applied by brush, or sprayed by using an airless pump. Grey, pourable liquid with slight gel.

• A volatile corrosion inhibiting lubricating oil
• Designed for use in the preservation of ferrous metal parts in enclosed systems
• Combines the protective properties of a preservative oil with those of volatile corrosion inhibitors

Works well in the preservation of “closed systems” where the volatile components will provide protection above the oil level. It provides an effective contact preservative oil film. Typical uses include: fuel tanks, storage tanks, cylinders, transmissions, metal containers, gear housings, clutch compartments, crankcases, hydraulic and coolant circulating systems.

• A volatile corrosion inhibiting lubricating oil
• Designed for use in the preservation of ferrous metal parts in enclosed systems
• Makes possible long term protection of rust within "closed" systems or voids

For use on the preservation of enclosed systems where the volatile components will provide protection above the oil level. It provides an effective contact preservative oil film. Typical examples of "closed" systems where product protects metal from damaging rust include: Fuel Tanks, Gear Housings, Storage Tanks, Clutch Compartments, Cylinders, Crankcases, Transmissions, Hydraulic and Coolant Circulating Systems, and Metal Containers.

• A thixotropic wax-based rustproofing compound
• Designed to provide a long-term protective film
• For use on automotive primed or unprimed steel

This rustproofing compound will dry to a black colored, wax-like film that will repel water, self-heal, and remain flexible at low temperatures. Will pass all of the requirements of Military Specifications AA-59295, Mil-C-62218-A and Mil-C-0083933. These specifications are titled: Corrosion Preventive Compound for New and Fielded Motor Vehicles and Trailers.

• A thixotropic wax-based rustproofing compound
• Designed to provide a long-term protective film
• For use on automotive primed or unprimed steel.

Dries to a tan colored, wax-like film that will repel water, self-heal, and remain flexible at low temperatures. Will pass all of the requirements of Military Specifications MIL-C-62218-A and MIL-C-0083933. [Titled: Corrosion Preventive Compound for New and Fielded Motor Vehicles and Trailers]. Will also pass all the requirements of SAEJ 1804 [Titled Corrosion Preventive Compound, Topside Vehicle Corrosion Protection].

• A calcium sulfonate wax-base corrosion preventive
• Designed to provide a long-term corrosion resistance
• For use in automotive underbody and inner cavity sections

Meets all requirements for Military Specification MIL-C-0083933A (MR), and MIL-C-62218 Type I Corrosion Preventative Compound for Motor Vehicles. Also meets the material requirements specified in the United States Post Office Maintenance Bulletin POD-V-82-80.

• A petroleum based sheet metal processing lubricant and preservative
• Designed for use on coiled stock as a combination rust preventive and pre-lube
• Approved as a preservative and lubricant on sheet and coiled steel for both Ford and General Motors

Works well in blankers (auto-shear) as a wash that leaves behind a lubricant and rust preventive film. Also used as a rust preventive spray on steel and steel parts. Non-interfering with body and assembly sealers, adhesives, and cleaning systems. Protects coiled stock in an acid fume environment.

• A fast-drying, water base coating
• Designed to protect unfinished metal and industrial finishes from acid
• Eliminates water spotting

Protects against the damaging effects of acid and solid particle fallout during transit and storage. The dry film is tack free to prevent dust and dirt pick-up. Excellent for use on aluminum and galvanized surfaces.

• A waterborne, asphalt emulsion corrosion preventive compound
• Suitable for complete undercoating of ferrous and non-ferrous metals
• Provides sound deadening

Designed for transportation equipment, trailer homes, modular homes, and the protection of sewage pipes. The cured film is firm, black, resilient, matte textured, and abrasion resistant

• Designed for rustproofing transportation equipment
• Provides galvanic corrosion protection
• Can be applied on battery terminals for insulating purposes
• Dry film is black and semi-firm

A solvent-borne, thixotropic corrosion preventive compound designed for rustproofing transportation equipment. Tectyl® 517 is approved under military specifications MIL-C-0083933A and under MIL-C-62218A, Types I and II, QPL Reference Numbers AR-18-85 and 2-7515.

• Designed for rustproofing transportation equipment
• Provides galvanic corrosion protection
• Can be applied on battery terminals for insulating purposes
• Dry film is translucent and semi-firm

A solvent-borne, thixotropic, corrosion preventive compound designed for rustproofing transportation equipment. Tectyl® 518 is approved under Military Specification MIL-C-62218, Type I, QPL Reference Number AR-18-85.

• A superior corrosion preventative for automotive underbodies
• Can be applied using conventional underbody rustproofing equipment

A water-based corrosion preventive designed for application to automotive underbodies. This compound will dry to a waxlike film. Shelf life is 90 days, and can be removed with soap and water or mineral spirits.

• Designed for rustproofing new and used vehicles
• Approved by OEM manufacturers

A solvent-borne corrosion preventive compound with translucent, amber, semi-firm film coating. Dry to touch time is approximately 2 to 4 hours, and cure time is 24 hours.

• Designed as a hinge seam protective wax for new vehicles
• OEM approved product

A water displacing corrosion preventive with a cured film that is translucent, waxy, and semi-firm. Dry to touch time is approximately 2 to 4 hours, and cure time is 24 hours.

• Designed to protect enclosed automotive body sections
• Repels water, self-heals, and remains flexible to prevent chipping and cracking.

A high solids, warm spray, rust-proofing compound that will dry to an amber, translucent film. Recommended for use over steel, galvanized and ELPO primed surfaces. Designed to be applied using airless spray equipment capable of heating material to 130°F.

• Ideal as a water displacing, long term, inner body corrosion preventive
• Specifically designed to protect enclosed automotive body sections
• Normally applied by low pressure airless spray equipment

A water-based rustproofing compound with a thin gel, but low viscosity that allows for film build on vertical surfaces and for seam penetration (capillary action) into areas with metal-to-metal overlap. The resulting film is clear in color and will repel water, self-heal, and remain flexible to prevent chipping or cracking.

• A solvent cutback, thixotropic corrosion preventive compound
• Suitable for complete undercoating for transportation equipment

The cured film is firm, black, resilient, abrasion resistant, and provides sound deadening.

• Highly effective in reducing vibrational resonance conditions in structures such as automobiles and trucks
• Meets the requirements of Chrysler MS-HA22-A and GM 9981949
• A cost effective, airless spray alternative to manually applied mastic sound pads

A liquid applied sound dampener specially formulated for use in automotive underbody and wheelhouse applications. It is a latex based, 0 VOC, chip resistant coating that is intended for application after final color bake over electro-coat primed steel or color coated body surfaces.

• A modified SBR rubber blend with 20% recycle content
• Chip-resistant, non-toxic, non-flammable, waterbased and virtually odorless
• Exceptional adhesion to a variety of materials
• Suitable for application over electro-coat primed or topcoat automotive surfaces

A viscoelastic, sprayable liquid sound damper. Highly effective in reducing vibrational resonance conditions in structures such as automotive underbody and wheelhouse, sheet metal panels, floor housings, and a multitude of other applications. Resistant to water and a variety of solvents, acids and corrosive gasses. An efficient and effective alternative to solvent-based sprayable damping products, as well as sheet applied damping materials.