Inside US: 800.688.0459

Request a Quote

Anti-Corrosion Coating Manufacturers


 

Anti-Corrosion Coating Manufacturers

Our SACI® line of thixotropic overbased calcium and sodium sulfonates, as well as several oxidates, provides formulators some of the highest performing corrosion inhibitors available. Water borne and solvent free products offer environmentally friendly options.


Quick Contact Form

First Name*
Last Name*
E-Mail*
Telephone
Comment

* Indicates required field


 

Anti-Corrosion Coating Manufacturers

SACI 2200A Solvent-Free Series

SACI® 2200A is an excellent choice for coating formulations, rheological modifiers to stabilize viscosity and as a pigment dispersing agent. Typical applications include:

  • Automotive: Anticorrosive caulks and sealants. Underbody and cavity linings. Hotmelt frame coatings.
  • Structural Steel: Maintenance coatings for bridges and highway. Penetrant sealers for bolted or plated assemblies. Surface tolerant direct-to-metal coatings.
  • Marine: Ballast tank linings – float coat or spray filled. General purpose above deck metal protections.
  • Oilfield: Sucker rod protections. General purpose outdoor storage coatings.
  • Asphalt Coatings: Improves corrosion resistance and adhesion. Water based and oil base.
  • Military: New and fielded vehicle rust protection specific formulations for A-A-59295.

SACI® 2200A is a thixotropic 100% solids calcium organic rust preventive base designed for use as is or in formulations where corrosion prevention, resistance to flow at elevated temperatures, low volatility, high flash and fire resistance are required. Because it is not highly formulated, SACI® 2200A generally serves as a formulating building block for customizing specialty products. Such additives as waxes, asphalts, resin oils, and other ingredients can enhance performance.


SACI 2550 Solvent-Free Series

SACI® 2550 is an optimal synthetic sodium sulfonate blend functioning as a surfactant, dispersant and rust inhibitor. The hydrophilic sodium sulfonate portion of the molecule functions as a typical anionic surfactant orienting itself with water, other polar materials or high energy surfaces while the hydrocarbon tail provides the bridge to the hydrophobic phase. Typical applications include:

  • Corrosion Preventative
  • Dispersants in Oil Systems

SACI 4028 Oxidate Series

SACI® 4028 is a barium soap of an oxygenated hydrocarbon. SACI® 4028 can be blended with oil or petroleum solvent. The film of SACI® 4028 is ultrathin and non-staining, providing excellent humidity resistance. The solutions of SACI® 4028 provide excellent water displacement. Solutions of the product will separate water displaced from metal surfaces quickly and completely, even after vigorous agitation.


SACI 4041 Oxidate Series

SACI® 4041 is an oxygenated hydrocarbon neutralized with calcium and blended with sodium sulfonate. SACI® 4041 is a corrosion inhibitor that can be blended with oil or petroleum solvent. The product has excellent humidity and corrosion properties, and can be used as a general purpose corrosion inhibitor additive in slushing oils, rust preventative lubricants, and metal working fluids. SACI® 4041 can also be used as an additive for the preparation of waterborne rust preventatives.


SACI 4056 Oxidate Series

SACI® 4056 is a calcium soap of an oxygenated hydrocarbon. SACI® 4056 can be blended with oil or petroleum solvent. The film of SACI® 4056 is ultrathin and non-staining, providing excellent humidity resistance. The solutions of SACI® 4056 provide excellent water displacement. Solutions of the product will separate water displaced from metal surfaces, quickly and completely, even after vigorous agitation.


SACI 4575 Oxidate Series

SACI® 4575 is an oxygenated hydrocarbon neutralized with barium and blended with sodium sulfonate. SACI® 4575 is a corrosion inhibitor that can be blended with oil or petroleum solvent. The product has excellent humidity and corrosion properties, and can be used as a general purpose corrosion inhibitor additive in slushing oils, rust preventative lubricants, and metal working fluids. SACI® 4575 can also be used as an additive for the preparation of waterborne rust preventatives.


SACI 5300 Solvent Borne Series

SACI® 5300 corrosion preventive concentrate is a solvent based, wax-modified dispersion which can be used to formulate protective coatings for virtually all metal surfaces. This product will typically yield films which are moderately firm and waxy. Like all SACI® products, SACI® 5300 corrosion preventive is polar in nature enabling these compounds to form highly adherent, water displacing films. Unique proprietary ingredients impart SACI® 5300 with excellent water repellency characteristics while simultaneously providing improved viscosity stability and lighter color.


SACI 5500 Solvent Borne Series

SACI® 5500 is a thixotropic calcium sulfonate-wax blend dispersed in mineral spirits. SACI® 5500 is supplied as a concentrate at 70% solids and can be easily diluted with mineral spirits for ease of handling during application. When diluted to 52% solids, SACI® 5500 will meet or exceed Corrosion Preventive Compounds, Cold Application Type I and II A-A-59295. Formulations based on SACI® 5500 will form a wax-like film when cured. These films have excellent adhesion to metal surfaces that will withstand severe humidity and salt spray corrosion exposure. Typical applications include:

  • Truck/Trailer Underbody Coatings
  • Auto Underbody Coatings
  • Float Coat/Ballast Tank Coatings
  • Aircraft or Various Nonferrous Coatings

SACI 6192 Waterborne Series

SACI® 6192 is a waterborne, high solids, formulating concentrate. Alone SACI® 6192 will yield an oily film providing excellent corrosion resistance in 90 minutes. The oily film will not re-emulsify when exposed to moisture. SACI® 6192 is designed to protect both ferrous and non-ferrous metals. This product is especially useful where the use of solvents is undesirable or where solvent emissions are restricted. SACI® 6192 is a morpholine free concentrate similar in physical and performance properties to SACI® 6450. SACI® 6192 is nominally 50% solids with a viscosity of 25,000 to 65,000 cps. Most formulations based on SACI® 6192 will require dilution with water or waterborne resins to achieve the desired film and application properties. SACI® 6192 is a stable anionic emulsion that can be formulated with a wide variety of latexes and resins commonly used in waterborne coatings. Recommended resins and starter formulation can be found on our Product Information Sheet.

SACI® 6192 is a waterborne, high solids, formulating concentrate. Alone SACI® 6192 will yield an oily film providing excellent corrosion resistance in 90 minutes. The oily film will not re-emulsify when exposed to moisture. SACI® 6192 is designed to protect both ferrous and non-ferrous metals. This product is especially useful where the use of solvents is undesirable or where solvent emissions are restricted. SACI® 6192 is a morpholine free concentrate similar in physical and performance properties to SACI® 6450. SACI® 6192 is nominally 50% solids with a viscosity of 25,000 to 65,000 cps. Most formulations based on SACI® 6192 will require dilution with water or waterborne resins to achieve the desired film and application properties. SACI® 6192 is a stable anionic emulsion that can be formulated with a wide variety of latexes and resins commonly used in waterborne coatings. Recommended resins and starter formulation can be found on our Product Information Sheet.


SACI 6400 Waterborne Series

SACI® 6400 is a waterborne, high solids, formulating concentrate using an innovative amine free emulsifier system. When used in conjunction with waterborne resins, SACI® 6400 imparts significantly improved corrosion resistance without introducing toxic or hazardous components. SACI® 6400 easily incorporated into waterborne resins due to its low viscosity. SACI® 6400 is designed to protect both ferrous and non-ferrous metals. This product is especially useful where the use of solvents is undesirable or where solvent emissions are restricted. SACI® 6400 is nominally 48% solids with a viscosity of 5,000 to 12,000 cps. Most formulations based on SACI® 6400 will require dilution with water or waterborne resins to achieve the desired film and application properties. SACI® 6400 is a stable anionic emulsion that can be formulated with a wide variety of latexes and resins commonly used in waterborne coatings. Recommended resins and starter formulation can be found on our Product Information Sheet.

SACI® 6400 is a waterborne, high solids, formulating concentrate using an innovative amine free emulsifier system. When used in conjunction with waterborne resins, SACI® 6400 imparts significantly improved corrosion resistance without introducing toxic or hazardous components. SACI® 6400 easily incorporated into waterborne resins due to its low viscosity. SACI® 6400 is designed to protect both ferrous and non-ferrous metals. This product is especially useful where the use of solvents is undesirable or where solvent emissions are restricted. SACI® 6400 is nominally 48% solids with a viscosity of 5,000 to 12,000 cps. Most formulations based on SACI® 6400 will require dilution with water or waterborne resins to achieve the desired film and application properties. SACI® 6400 is a stable anionic emulsion that can be formulated with a wide variety of latexes and resins commonly used in waterborne coatings. Recommended resins and starter formulation can be found on our Product Information Sheet.


SACI 6400 Waterborne Series

SACI® 6400 is a waterborne, high solids, formulating concentrate using an innovative amine free emulsifier system. When used in conjunction with waterborne resins, SACI® 6400 imparts significantly improved corrosion resistance without introducing toxic or hazardous components. SACI® 6400 easily incorporated into waterborne resins due to its low viscosity. SACI® 6400 is designed to protect both ferrous and non-ferrous metals. This product is especially useful where the use of solvents is undesirable or where solvent emissions are restricted. SACI® 6400 is nominally 48% solids with a viscosity of 5,000 to 12,000 cps. Most formulations based on SACI® 6400 will require dilution with water or waterborne resins to achieve the desired film and application properties. SACI® 6400 is a stable anionic emulsion that can be formulated with a wide variety of latexes and resins commonly used in waterborne coatings. Recommended resins and starter formulation can be found on our Product Information Sheet.

SACI® 6400 is a waterborne, high solids, formulating concentrate using an innovative amine free emulsifier system. When used in conjunction with waterborne resins, SACI® 6400 imparts significantly improved corrosion resistance without introducing toxic or hazardous components. SACI® 6400 easily incorporated into waterborne resins due to its low viscosity. SACI® 6400 is designed to protect both ferrous and non-ferrous metals. This product is especially useful where the use of solvents is undesirable or where solvent emissions are restricted. SACI® 6400 is nominally 48% solids with a viscosity of 5,000 to 12,000 cps. Most formulations based on SACI® 6400 will require dilution with water or waterborne resins to achieve the desired film and application properties. SACI® 6400 is a stable anionic emulsion that can be formulated with a wide variety of latexes and resins commonly used in waterborne coatings. Recommended resins and starter formulation can be found on our Product Information Sheet.


SACI 6445 Waterborne Series

SACI® 6445 is a waterborne corrosion preventive designed to yield a moderately firm, slightly waxy film that provides the flexibility and resilience needed for rigorous automotive applications. It offers excellent resistance to re-emulsification and improved corrosion inhibition without the use of solvents. The film becomes water resistant after approximately 90 minutes at 77° F and 50% Relative Humidity.


SACI 6450 Waterborne Series

SACI® 6450 is a waterborne, high solids, formulating concentrate. Alone SACI® 6450 will yield an oily film providing excellent corrosion resistance in 90 minutes. The oily film will not re-emulsify when exposed to moisture. SACI® 6450 is designed to protect both ferrous and non-ferrous metals. This product is especially useful where the use of solvents is undesirable or where solvent emissions are restricted.


SACI 7760 Solvent Borne Series

A corrosion inhibitor base formulated with other raw materials to create finished products like:

  • Auto Underbody Coatings
  • Float Coat/Ballast Tank Coatings
  • Aircraft or Various Nonferrous Coatings

SACI® 7760 is a thixotropic, 65% solids calcium sulfonate base designed to be the primary ingredient for formulation of higher solids, reduced VOC ferrous and nonferrous corrosion preventatives.

Because it is not a formulated product, waxes, asphalts, resins, oils and other ingredients must be incorporated to form a continuous protective film and customize performance.

Formulations based on SACI® 7760 can form a cured film having excellent adhesion with severe humidity and salt spray corrosion protection.

SACI® 7760 is very environmentally friendly and does not contain barium, lead, or zinc.